Resources
Items marked as restricted are available to members only. Join INMM today to access over 60 years of insight from experts in the nuclear materials management industry.
Type:PATRAM Proceedings
Abstract:
For the skyshine calculation of transport and storage casks, it is not reasonable to use the detailed cask geometry as a source because of…
Type:PATRAM Proceedings
Abstract:
Following a request of the French Defence Transport Safety Committee, consideration has been given to the activity content limits…
Type:Annual Meeting Proceedings
Abstract:
In the early 1990’s, Brookhaven National Laboratory (BNL) developed a prototype computer for non-intrusive measurements of sensitive items…
Type:PATRAM Proceedings
Abstract:
As of May 31, 2000, the Canadian Nuclear Safety Commission (CNSC), formerly the Atomic Energy Control Board (AECB), was created and a new…
Type:PATRAM Proceedings
Abstract:
The practical threshold for water leak-tightness of small leaks was determined by experimentation. Small leak samples were made and…
Type:Annual Meeting Proceedings
Abstract:
The introduction of non-destructive assay (NDA) equipment to Russian nuclear facilities for material control and accounting applications…
Type:PATRAM Proceedings
Abstract:
One of the major changes in the IAEA Transport Regulations (No. TS-R-1 (ST-1, Revised)) is the explicit requirement for the establishment…
Type:PATRAM Proceedings
Abstract:
he volume of remote-handled (RH) transuranic (TRU) waste managed by the U.S. Department of Energy (DOE) is estimated to be 4,027.3 cubic…
Type:Annual Meeting Proceedings
Abstract:
As further reductions in nuclear weapon stockpiles are planned, it becomes increasingly important to confirm with high confidence that…
Type:Annual Meeting Proceedings
Abstract:
A new skid-mounted tomographic gamma scanner (TGS) was designed to assist in the decommissioning of Rocky Flats Building 371. This…
Type:PATRAM Proceedings
Abstract:
It is advantageous to use liquid neutron shield for a spent fuel transportable storage cask, because of heat removal performance and…
Type:Annual Meeting Proceedings
Abstract:
In order to determine if a statistically significant difference exists between shipper and receiver measurements, a statistical combination…
Type:Annual Meeting Proceedings
Abstract:
The application of game theory to the design of Material, Control and Accounting (MC&A) sampling plans is discussed. Game theory can be…
Type:PATRAM Proceedings
Abstract:
Baker Hughes INTEQ, a division of Baker Hughes Incorporated, provides drilling and associated services to the global oil and gas industry.…
Type:Annual Meeting Proceedings
Abstract:
ARIES is a Department of Energy (DOE) Office of Fissile Material disposition project to demonstrate stateof- the-art methods for…
Type:Annual Meeting Proceedings
Abstract:
In 1996, the International Physical Protection Advisory Service (IPPAS) was established by the International Atomic Energy Agency (IAEA) to…
Type:Annual Meeting Proceedings
Abstract:
Canberra Industries and LANL have collaborated in designing a next generation Integrated Box Interrogation System, IBIS, to meet the…
Type:Annual Meeting Proceedings
Abstract:
Since the mid-90’s, U.S. Government (USG) programs have struggled with obtaining access at foreign facilities. Requirements for access in…
Type:Annual Meeting Proceedings
Abstract:
Northeast Asia countries have experienced fast economic growth during the past few decades. With it, the level of energy consumption has…
Type:PATRAM Proceedings
Abstract:
The world is indeed complex when it comes to the transportation of radioactive materials. In reality, a very high degree of safety has been…